European Oral Research

GÖNDERBİLGİ
EnglishTürkçe

Araştırma Makalesi


DOI :10.26650/eor.20231177548   IUP :10.26650/eor.20231177548    Tam Metin (PDF)

İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma

Sneha Saraf, Sunil Kumar Mishra, Benaiffer Agrawal

Amaç: Bu çalışmanın amacı, esnek protez kaide malzemesinin yüzey pürüzlülüğüne içecek, protez temizleyici ve klorheksidin glukonat solüsyonunun etkisini değerlendirmek ve karşılaştırmaktı.

Gereç ve yöntem: Çapı 50±1 mm ve kalınlığı 0.5±0.05 mm olan elli esnek protez kaide reçinesi örneği üretildi. Örnekler, her biri on örnek içeren beş gruba ayrıldı. Numuneler damıtılmış suya daldırıldı (Kontrol grubu A); sıcak kahve (Grup B); soğuk içecek (Grup C); protez temizleyici (Grup D) ve %2 klorheksidin glukonat solüsyonu (Grup E) içeren sodyum perborat. Numuneler, 60 güne kadar belirtilen çözeltilerde günde 10 dakika süreyle daldırıldı. Yüzey pürüzlülüğü (Ra) atomik kuvvet mikroskobu yardımıyla 1, 20. ve 60. günlerde değerlendirildi. İstatistiksel analiz, iki yönlü ANOVA ve Tukey’s Post hoc testi kullanılarak yapıldı.

Bulgular: İki yönlü ANOVA, ortalama Ra değerlerinin daldırma için kullanılan solüsyon tipine (p<0.001) ve daldırma süresine (p<0.001) bağlı olarak önemli ölçüde değiştiğini ortaya koydu. Soğuk içecek ile yüzey pürüzlülüğündeki değişim en yüksekti (p=0.001). 60. günde, esnek protez kaide reçine malzemesinin yüzey pürüzlülüğü, soğuk içecek (0.184 µm) ve protez temizleyici (0.203 µm) ile, damıtılmış su (0.052 µm), sıcak kahve (0.030 µm) ve %2 klorheksidin glukonat ( 0,068 mikron).

Sonuç: Doğası gereği asidik olan soğuk içeceğe ve peroksit içeren protez temizleyiciye maruz kalmak, termoplastik poliamid esnek protez kaidesi rezin numunelerinde çok daha pürüzlü bir yüzey oluşturur.

Anahtar Kelimeler: biyofilm, esnek protez, poliamid, polimetilmetakrilat, yüzey pürüzlülüğü
DOI :10.26650/eor.20231177548   IUP :10.26650/eor.20231177548    Tam Metin (PDF)

Effect of beverages, denture cleanser and chlorhexidine gluconate on surface roughness of flexible denture base material: an in vitro study

Sneha Saraf, Sunil Kumar Mishra, Benaiffer Agrawal

Purpose: The purpose of the study was to evaluate and compare the effect of beverages, denture cleanser and chlorhexidine gluconate solution on surface roughness of flexible denture base material.

Materials and method: Fifty flexible denture base resin specimens measuring 50±1mm in diameter and 0.5±0.05 mm in thickness were fabricated. The specimens were divided into five groups each containing ten specimens. The specimens were immersed in distilled water (Control group A); hot coffee (Group B); cold beverage (Group C); sodium perborate containing denture cleanser (Group D) and 2% chlorhexidine gluconate solution (Group E). The specimens were immersed for 10 min daily in mentioned solutions for up to 60 days. Surface roughness (Ra) was evaluated on the 1st, 20th and 60th day with the help of atomic force microscope. The statistical analysis was done using two-way ANOVA and Tukey’s Post hoc test.

Results: The two- way ANOVA revealed that the average Ra values varied significantly depending on the type of solution used for immersion (p<0.001) and the duration of immersion (p<0.001). Variation in surface roughness with cold beverage was highest (p=0.001). On the 60th day the surface roughness of flexible denture base resin material was higher with cold beverage (0.184 μm) and denture cleanser (0.203 μm) than that of distilled water (0.052 μm) hot coffee (0.030 μm) and 2% chlorhexidine gluconate (0.068 μm).

Conclusion: Exposure to cold beverage, which was acidic in nature and peroxide containing denture cleanser, produces much rougher surface in the thermoplastic polyamide flexible denture base resin specimens.

Anahtar Kelimeler: biofilm, flexible denture, polyamide, polymethylmethacrylate, surface roughness

PDF Görünüm

Referanslar

  • Tanoglu M, Ergun Y. Porous nanocomposites prepared from layered clay and PMMA [poly (methyl methacrylate)].Composites Part A: Appl Sci Manufact 2007;38:318-22. google scholar
  • Vojdani M, Giti R. Polyamide as a denture base material: a literature review. J Dent(Shiraz) 2015; 16:1-9. google scholar
  • Singh JP, Dhiman RK, Bedi RP, Girish SH. Flexible denture base material: a viable alternative to conventional acrylic denture base material. Contemp Clin Dent 2011;2:313-17. google scholar
  • Fueki K, Ohkubo C, Yatabe M, Arakawa I, Arita M, Ino S, et al. Clinical application of removable partial dentures using thermoplastic resin-Part I: Definition and indication of non-metal clasp dentures. J Prosthodont Res 2014;58:3-10. google scholar
  • Abuzar MA, Bellur S, Duong N, Kim BB, Lu P, Palfreyman N,et al. Evaluating surface roughness of a polyamide denture base material in comparison with poly (methyl methacrylate). J Oral Sci 2010;52:577-81. google scholar
  • Paranhos HFO, Silva-Lovato CH, Souza RF, Cruz PC, Freitas KM, Peracini A. Effects ofmechanical and chemical methods on denture biofilm accumulation. J Oral Rehab 2007;34:606-12. google scholar
  • Schwindling FS, Rammelsberg P, Stober T. Effect of chemical disinfection on the surface roughness of hard denture base materials: a systematic literature review. Int J Prosthodont 2014;27-215-25. google scholar
  • Bansal K, Acharya SR, Saraswathi V. Effect of alcoholic and non-alcoholic beverages on color stability and surface roughness of resin composites: An in vitro study. J Conserv Dentistry 2012;15:283-8. google scholar
  • Senna PM, Vieira AP, Sotto-Maior BS, Silva WJ, Del Bel Cury AA. Influence of immersion time of denture cleansers on the surface roughness of resilient denture liners. Revista Odonto Ciencia. 2011;26(1):35-9. google scholar
  • Bajwa NK, Pathak A. Change in surface roughness of esthetic restorative materials after exposure to different immersion regimes in a cola drink. ISRN dentistry 2014;2014:353926. google scholar
  • Poggio C, Dagna A, Chiesa M, Colombo M, Scribante A. Surface roughness of flowable resin composites eroded by acidic and alcoholic drinks. J Conservative Dent 2012;15:137-40. google scholar
  • Maganur PC, Prabhakar AR, Satish V, Namineni S, Kurthukoti A. Erosive effect of soft drink and fresh fruit juice on restorative materials. World J Dent 2013;4:32-40. google scholar
  • de Gouvea CV, Bedran LM, de Faria MA, Cunha-Ferreira N. Surface roughness and translucency of resin composites after immersion in coffee and soft drink. Acta Odontol Latinoam. 2011; 24:3-7. google scholar
  • 1Sepulveda-Navarro WF, Arana-Correa BE, Ferreira Borges CP, Habib Jorge J, Urban VM, Campanha NH. Color stability of resins and nylon as denture base material in beverages. J Prosthodont 2011;20:632-8. google scholar
  • Pradhan S, Mathuriya S, Sonkesriya S, Maheshwari A, Gaur G, Choubey A. Evaluation of surface topography of heat cure acrylic denture-base resin before and after reinforcement with different fibers using stylus-based profilometer. J Contemp Dent Pract 2022;23:415-8. google scholar
  • Alfouzan AF, Alotiabi HM, Labban N, Al-Otaibi HN, Al Taweel SM, AlShehri HA.Effect of aging and mechanical brushing on surface roughness of 3D printed denture resins: A profilometer and scanning electron microscopy analysis. Technol Health Care 2022;30:161-73. google scholar
  • Ilieva T, Karova E. Application of Atomic Force Microscopy in Dental Investigations. Int J Sci Res 2020;9:1319-26. google scholar
  • Revised American Dental Association specification no.12 for denture base polymers. J Am Dent Assoc 1975;90:451-8. google scholar
  • Singh K, Gupta N. Injection molding technique for fabrication of flexible prosthesis from flexible thermoplastic denture base materials. World J Dent 2012;3:303-7 google scholar
  • Ucar Y, Akova T, Aysan I. Mechanical properties of polyamide versus different PMMA denture base materials. J Prosthodont 2012;21:173-6. google scholar
  • Hamanaka I, Takahashi Y, Shimizu H. Mechanical properties of injection-molded thermoplastic denture base resins. Acta Odontol Scand 2011;69:75-9. google scholar
  • Bollenl CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater 1997;13:258-69. google scholar
  • Tari FB, Nalbant D, Dogruman Al F, Kustimur S. Surface roughness and adherence of candida albicans on soft lining materials as influenced by accelerated ageing. J Contemp Dent Pract 2007;8:18-25. google scholar
  • Pusz A, Szymiczek M, Michalik K. Ageing process influence on mechanical properties of polyamide-glass composites applied in dentistry. J Achiev Mater Manufact Eng 2010;38:49-55. google scholar
  • Sagsoz NP, Yanıkoglu N, Ulu H, Bayındır F. Color changes of polyamid and polymetyhl methacrylate denture base materials. Open J Stomatol 2014;4:489-96. google scholar
  • Constantinescu IR, Ursache M, Mardarez D. Effect of pH on the surface roughness of heat cured denture base acrylic resins. Rev Med Chir Soc Med Nat Iasi 2007;111:477-81. google scholar
  • Abdul-Razaq RW. The effect of thermocycling and different pH of artificial saliva on the impact and transverse strength of heat cure resin reinforced with silanated ZrO2 nano-fillers. J Bagh Coll Dent 2013;25(Special Is):12-7.ıted zrO2 nano-fill google scholar
  • Durkan R, Ayaz EA, Bagis B, Gurbuz A, Ozturk N, Korkmaz FM. Comparative effects of denture cleansers on physical properties of polyamide and polymethyl methacrylate base polymers. Dent Mater J 2013;32:367-75. google scholar
  • Nikawa H, Hamada T, Yamashiro H, Kumagai H. A review of in vitro and in vivo methods to evaluate the efficacy of denture cleansers. Int J Prosthodont 1998;12:153-9. google scholar
  • Davi LR, Felipucci DNB, de Souza RF, Bezzon OL, Lovato-Silva CH, Pagnano VO, et al. Effect of denture cleansers on metal ion release and surface roughness of denture base materials. Braz Dent J 2012;23:387-93. google scholar
  • da Silva FC, Kimpara ET, Mancini MNG, Balducci I, Jorge AOC, Koga-Ito CY. Effectiveness of six different disinfectants on removing five microbial species and effects on the topographic characteristics of acrylic resin. J Prosthodont 2008;17:627-33. google scholar
  • Azevedo A, Machado AL, Vergani CE, Giampaolo ET, Pavarina AC, Magnani R. Effect of disinfectants on the hardness and roughness of reline acrylic resins. J Prosthodont 2006;15:235-42. google scholar
  • Machado AL, Giampaolo ET, Pavarina AC, Jorge JH, Vergani CE. Surface roughness of denture base and reline materials after disinfection by immersion in chlorhexidine or microwave irradiation. Gerodontology 2012;29:e375-82. google scholar

Atıflar

Biçimlendirilmiş bir atıfı kopyalayıp yapıştırın veya seçtiğiniz biçimde dışa aktarmak için seçeneklerden birini kullanın


DIŞA AKTAR



APA

Saraf, S., Mishra, S.K., & Agrawal, B. (2023). İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma. European Oral Research, 58(2), 76-82. https://doi.org/10.26650/eor.20231177548


AMA

Saraf S, Mishra S K, Agrawal B. İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma. European Oral Research. 2023;58(2):76-82. https://doi.org/10.26650/eor.20231177548


ABNT

Saraf, S.; Mishra, S.K.; Agrawal, B. İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma. European Oral Research, [Publisher Location], v. 58, n. 2, p. 76-82, 2023.


Chicago: Author-Date Style

Saraf, Sneha, and Sunil Kumar Mishra and Benaiffer Agrawal. 2023. “İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma.” European Oral Research 58, no. 2: 76-82. https://doi.org/10.26650/eor.20231177548


Chicago: Humanities Style

Saraf, Sneha, and Sunil Kumar Mishra and Benaiffer Agrawal. “İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma.” European Oral Research 58, no. 2 (Dec. 2024): 76-82. https://doi.org/10.26650/eor.20231177548


Harvard: Australian Style

Saraf, S & Mishra, SK & Agrawal, B 2023, 'İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma', European Oral Research, vol. 58, no. 2, pp. 76-82, viewed 23 Dec. 2024, https://doi.org/10.26650/eor.20231177548


Harvard: Author-Date Style

Saraf, S. and Mishra, S.K. and Agrawal, B. (2023) ‘İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma’, European Oral Research, 58(2), pp. 76-82. https://doi.org/10.26650/eor.20231177548 (23 Dec. 2024).


MLA

Saraf, Sneha, and Sunil Kumar Mishra and Benaiffer Agrawal. “İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma.” European Oral Research, vol. 58, no. 2, 2023, pp. 76-82. [Database Container], https://doi.org/10.26650/eor.20231177548


Vancouver

Saraf S, Mishra SK, Agrawal B. İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma. European Oral Research [Internet]. 23 Dec. 2024 [cited 23 Dec. 2024];58(2):76-82. Available from: https://doi.org/10.26650/eor.20231177548 doi: 10.26650/eor.20231177548


ISNAD

Saraf, Sneha - Mishra, SunilKumar - Agrawal, Benaiffer. “İçeceklerin, protez temizleyicinin ve klorheksidin glukonatın esnek protez kaide malzemesinin yüzey pürüzlülüğüne etkisi: in vitro çalışma”. European Oral Research 58/2 (Dec. 2024): 76-82. https://doi.org/10.26650/eor.20231177548



ZAMAN ÇİZELGESİ


Gönderim29.09.2022
Kabul01.06.2023
Çevrimiçi Yayınlanma06.07.2023

LİSANS


Attribution-NonCommercial (CC BY-NC)

This license lets others remix, tweak, and build upon your work non-commercially, and although their new works must also acknowledge you and be non-commercial, they don’t have to license their derivative works on the same terms.


PAYLAŞ




İstanbul Üniversitesi Yayınları, uluslararası yayıncılık standartları ve etiğine uygun olarak, yüksek kalitede bilimsel dergi ve kitapların yayınlanmasıyla giderek artan bilimsel bilginin yayılmasına katkıda bulunmayı amaçlamaktadır. İstanbul Üniversitesi Yayınları açık erişimli, ticari olmayan, bilimsel yayıncılığı takip etmektedir.